My Kenmore 795.7106 bottom freezer has a refrigerator door icemaker. Soft buttons on the door allow changing from ice cubes, to crushed ice, to water. The control is stuck in crushed ice mode. How can this be fixed?
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
My ice maker is stuck on crushed. How do I fix this other than just touching the ice cube button?
On a Kenmore side by side the problem is usually the REAR control rod popping out of place.
You must empty the cubes out, HOLD the FRONT flapper OPEN (as it is Spring loaded) and carefully insert the REAR control rod making sure it is on TOP of the plastic "flipper arm" actuator at the REAR of the unit.
the control rod was my problem, i made a wood stick 2 1/2 longe to hold flapper open on the front end of ice bin on my side by side kenmore fridge/freezer
Check the solenoid in auger
I don't have your icemaker but basically, they're all pretty similar. I also had my icemaker making just crushed ice. I washed out the bin, removed anything frozen onto it and ALSO made sure there wasn't ice stuck in that (usually) square hole behind where the bin goes in... the hole is where the rod part of the ice bin fits into your fridge.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
