|
|
Showing 1-10 of 34 Articles
|
Next 10
|
|
 |
| Tub Drain Rocker Arm Fell Into the Drain
|
|
My bathtub overflow drain pipe lift rod assembly fell into the pipe. I cannot see it. I must remove it, but how?
|
| Posted on: 10/17/2009 | 1 Feedback(s) |
 |
|
| Drain Cleaner Faded Color on Sink
|
|
Help. I used a drain cleaner and it faded the finish on my red sink. How can I restore the color?
|
| Posted on: 09/05/2009 | 2 Feedback(s) |
|
|
| Repairing A Cracked Plastic Tub
|
|
There's no way to afford a new tub right now. Does anyone know how to repair a plastic bathtub? I have a garden tub and the seat is cracked to the point that unless I keep duct tape (the only thing to stay on more than a few days so far) over the crack, the tub leaks horribly.
|
| Posted on: 09/01/2009 | 7 Feedback(s) |
|
|
| Can Hot Water Damage a Wax Ring?
|
|
My plumber hooked up the wrong pipe and my toilet filled with 150 degree hot water, which burned my bottom when I flushed. He came back and fixed it, but do you think that I need a new wax ring?
|
| Posted on: 08/12/2009 | 4 Feedback(s) |
|
|
| Painting Fiberglass Boards Around a Tub
|
|
We purchased a very old house. The previous owners put up fiberglass boards around the tub to make it a shower. It is stained with rust. I would like to paint the fiberglass boards around the tub. Any ideas on how to do that?
|
| Posted on: 06/02/2009 | 1 Feedback(s) |
|
|
| Worn Spots on Tub Bottom
|
|
At the bottom of my tub, I have noticed several spots where the color has worn off. These spots almost look like chips, except that the edges are not rough like a chip would be.
|
| Posted on: 05/05/2009 | 2 Feedback(s) |
|
|
| Curling Iron Burn on Counter Top
|
|
How do I get rid of a curling iron burn on my bathroom (vinyl, formica, maybe plastic?) countertops?
|
| Posted on: 04/09/2009 | 1 Feedback(s) |
|
|
| Removing a Bathtub Drain Plug
|
|
How do I remove the drain plug from the combination tub/shower? It is the press and lock version, with no lever. I must remove it to clean it out. Thanks!
|
| Posted on: 04/02/2009 | 3 Feedback(s) |
|
|
| Tub Stopper Lever Won't Go Down
|
|
I can't get the stopper lever on my bathtub to go down to let the water out. It is stuck upwards and needs to go down. Does anyone know how to fix?
|
| Posted on: 03/10/2009 | 4 Feedback(s) |
|
|
| Scratches on a Plastic Sink
|
|
I live in a modular home and the bathroom sinks are not like the regular ones, they seem to be made out of plastic. One of them had a yellow ring that wouldn't clean up, so I used a pumice stone and it scratched. How can I fixed it?
|
| Posted on: 03/09/2009 | 5 Feedback(s) |
|
|
|
|
Showing 1-10 of 34 Articles
|
Next 10
|
|
