| ||
| Source: http://www.thriftyfun.com/tf34382199.tip.html | ||
Craft: Baby Food Jar Tea Lites
Supplies
InstructionsBrush etching cream on jar. No need to do the rim or the bottom. Let sit overnight. Be sure to place the jar on a thick rag or towel to protect your work surface. Doing more than one at a time makes it more worthwhile. Wash dried cream off with soap and warm water. If not totally etched, reapply cream and let sit overnight again.Cut a piece of contact paper to about the size of a half-dollar. Stick on side of jar. Make sure all edges are flat. This is going to be your little window for the light to shine through. Brush on brown paint. Let dry. Brush on crackle medium and let sit 5 minutes. Brush on Tan paint. Let dry. Brush on Antiquing gel and gently rub off excess. Let dry. Remove the contact paper circle. Spray with clear spray paint. Let dry. Spray another coat and let dry. Cut a piece of felt to fit the bottom of the jar. Glue on. Glue beads around rim of jar overlapping at the end. Be sure to put glue on the end of the tape to keep it from raveling. Put in your tea lite and watch it glow! You can see a battery powered lite in the jar on the left. These can be done in other colors as well. Just be sure to put on several coats so the light doesn't shine through. I just like to make my glass look like ceramic. Make sure you spray the clear paint on at least two coats to protect the finish. By Artlady from Edmond, OK | ||
| Source: http://www.thriftyfun.com/tf34382199.tip.html | ||
|
© 1997-2009 ThriftyFun.com
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately. |