CD and DVD Beads

These beads were made from recycled CDs. When you make them, they are a bit stinky so use a well ventilated area or a mask.

Do be careful - They get hot!

I hope the pictures show you all you need to know. But here are some instructions to help I hope.

1. Heat CD over heat-gun.
2. Cut CDs into small strips wide or narrow (about a 1 cms or 1/2 inch works best)
3. Hold one end in pliers and other end in needle nose pliers over heat gun.
4. As they begin to become soft and wobbly, roll up the end held in the needle nose pliers (Like a swiss roll or paperbead. Do Not Touch as they are Hot!)
5. Heat the end over heat gun and press hard with pliers or worksurface top to end the bead and so nothing is sticking up.

It takes a bit of trial and error to get them right but that's the basic idea. Anyway have fun. DON'T INHALE THE FUMES! BEWARE BECAUSE THEY DO GET HOT!

If you discover an idea to modify the making or something please let me know! HAVE FUN!- Cathy :o)

By Cath Alksnis from Bradford West Yorkshire

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.