|
| Source: http://www.thriftyfun.com/tf409545.tip.html |
Clay Pot Wind ChimeBy Kelli MahoneyIngredients:
Optional Ingredients:
Directions:
Take your hemp and cut 6 pieces of hemp 12" each. Take your rubber band and wrap it tightly around one end of the long dowel. Do this for the other two. Then take two pieces of the hemp and knot one end of each under the rubber band to the dowel. Do this for each of the dowels. Place some glue on the knots. It is okay it they are not perfectly tight. The rubber band is there to keep the dowel from slipping out of the knot. Then take the other end of the hemp and tie it to the small dowel that will be going into the flowerpot. The "chime" should look like a puppet hanging down from the dowel. Do the same for the other two "chimes." Remember to glue the knots to help keep them fastened. Then take a very long string of hemp and tie it around the two strings holding the dowel toward the "chime." Wrap the string around and around the two pieces of hemp. This forms what looks like one piece of hemp. When you get to the other end, tie a knot around the string, and then tie another knot around the dowel. With all of the "chimes" tied to the small dowel, go ahead and glue the small dowel into the flowerpot. You can use hot glue or regular glue. Take another 16 inch piece of hemp and tie both ends to the small dowel. You will string the hemp through the hole in the flower pot and use it for hanging. This is why you can use either type of glue, because when you hang the wind chimes, the dowel will be fastened inside the pot. |
| Source: http://www.thriftyfun.com/tf409545.tip.html |
|
© 1997-2009 ThriftyFun.com
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately. |