| ||
| Source: http://www.thriftyfun.com/tf46245774.tip.html | ||
Craft: Valentine Candy Bar 'Vase'
Materials
InstructionsTake the 3 candy bars and hold them vertically so the sides touch each other forming a triangle in the center.Once you see how this forms then you will put a small line of glue on the inner edge of the candy bars and glue them together to permanently form the triangle model. Then cut a small piece of styrofoam or wad enough newspaper up in a ball so you can stuff in in the center of the candy bars (should fit fairly snug). Then remove it and poke a hole with the stem of the silk flower (or real one). Then put some glue around the edges of the styrofoam or newspaper and put it in the center of the candy bars quickly so it will be more permanent and let the glue adhere for a minute or so. Now take the silk or real rose stem and poke it in the hole you previously made in the styrofoam or newspaper centerpiece you just glued. Stuff some tissue paper from the bottom to cover the styrofoam or newspaper. Finish off with stuffing more tissue paper around the stem to cover the remaining glued centerpiece. Last, tie the red ribbon around the flower stem about 2 inches above the edge of the candy bar model. For added fun, you can glue Hershey's kisses around the top. Now you have a inexpensive but thoughtful gift for your woman. If you wish to give this to a guy, replace the rose with whatever you want. You can also write a note and then punch a hole big enough for the ribbon to go through and then tie it to the stem. By Donna from Northlake TX | ||
| Source: http://www.thriftyfun.com/tf46245774.tip.html | ||
|
© 1997-2009 ThriftyFun.com
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately. |