|
| Source: http://www.thriftyfun.com/tf501482.tip.html |
Hanger ArtBy Destiny princeYou will need a little square piece of wood not too small, a wire coat hanger, a knee high stocking, and paint. First drill a hole in the piece of wood don't let it go all the way through the wood. Then take some wire clippers and clip off the hanger's top, Have your child bend the hanger into any kind of design. Next put the end of the hanger in the hole you drilled. Finally let your child put the knee high over the hanger and let them paint designs on the knee high. It's just a little craft that can become big. Destiny Prince |
| Source: http://www.thriftyfun.com/tf501482.tip.html |
|
© 1997-2009 ThriftyFun.com
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately. |