Ornament Made from a Recycled CD

I took an old CD and took two piece of cardstock paper and traced the CD onto the paper. I then took an exacto knife and made three holes in the bottom of the CD (for the beads) and one hole in the top (for the hanger). You can use a dremel, or you can use a drill with a small bit, you can even get a metal skewer hot and poke a hole thru the CD.

I then attached the cardstock onto the CD using decoupage medium. Let it dry. After it is dry then you can hollow out the holes in the paper.

I painted my paper with craft paint of one color let dry, (both sides). Then I used a crackle medium and brushed it on, let dry, (both sides). I then painted contrasting color over the crackle medium, let dry, (both sides).

Then I added a picture I printed off the Internet. I attached the picture with decoupage medium. You can do several coats of the decoupage medium. Let dry in between coats. I then put some wire thru the holes and attached the beads.

Very simple and easy to do. Let your imagination soar! You can use scrapbook paper and images too.

Michele

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.