Source: http://www.thriftyfun.com/tf557438.tip.html

Gluing Aluminum to Asphalt Tile

I recently had a new asphalt tile roof put on my house. I have valleys in the roof and when it rains the water in the valleys becomes a torrent, ignores the gutters and comes off the house like a fire hose.

On the previous roof the shingles did not have a very good adhesive and I was able to put a "V" shaped piece of aluminum under the tiles near the bottom of the valley sticking up about 3" and 2" on each side. This slowed the flow and diverted it to the side of the V. This worked very well.

The new tiles are so tightly glued that they rip if I try to lift them. I want to glue a similar arrangement as above in the valleys and would like suggestions as to what to use to glue the aluminum V's on top of the new asphalt shingles which are covered with stone?

Nick From Connecticut

Source: http://www.thriftyfun.com/tf557438.tip.html

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.