| ||
| Source: http://www.thriftyfun.com/tf57374875.tip.html | ||
Craft Project: Cookie Cutter Garden StakesBy Ellen Brown
Materials
Optional Items
Instructions
Assemble your materials. Using unfinished wood, cardboard, or several layers of newspaper as a work surface, shape a handful of clay into a patty and using your rolling pin, roll it out like cookie dough until it's approximately 1/2 inch thick. Roll out only enough clay to cut out one or two cookies at a time. Keep the rest in a tightly sealed bag until you need it. Before cutting out your clay cookies, compare the thickness of your dough to the thickness of the dowel you will be using. The dough should be thick enough so that when you go to insert the dowel into the middle of the clay, it doesn't break through. For example, I used 1/4 inch wooden dowels and rolled out my dough 1/2 inch thick. Adjust the thickness if necessary, then cut out assorted shapes using your cookie cutters. After you cut out your clay cookies, make a hole in the bottom for your dowel. Make sure the hole is deep enough so that after baking, your dowel can be reinserted far enough into the cookie to support its weight. I made my dowel holes 1-1 1/2 inches deep.
Warning: Do not embed any embellishments into the clay, they will catch fire in the oven! Also, the copper antennae on my butterfly did fine, but be forewarned that some metal finishes turn color when heated.
After drying your cookies, bake them according to the directions that came with your clay. My clay baked at 350 degrees F for 1 hour. After baking, your cookies can be painted with acrylic, enamel, tempera, or watercolors, or they can be stained or antiqued with the same products recommended for wood. After the cookies cool down from baking, drop a few drops of wood glue into the dowel holes and insert the dowels. Let the glue dry for a few minutes before moving on to the next step. Finally, if you're planning to use your plant stakes outdoors, apply several layers of a clear polyurethane sealant to them to protect them from moisture damage. Follow directions according to the label. You can find clear polyurethane at craft stores of wherever paints are sold. Helpful Hints Clay: I used Ovencraft Clay by Laguna that I bought at Michaels Craft Store. A 4 lb box (now that's a LOT of plant stakes!) cost $9.99 + tax (no coupon). Michaels carries other bakeable clays, and although some were cheaper, I happened to like the color of this one. If the idea of baking clay doesn't inspire you, clay that hardens by air drying may work for this project, too (I haven't tried it). Many stores that carry craft supplies carry some type of bakeable clay.
Baking: There may be a small amount of smoke and an intense odor as the clay bakes, so run the hood on your stove and crack the kitchen windows. Projects should ALWAYS be baked by adults. Drying: How long it takes varies according to the thickness of your clay. Place your cookies on several layers of newspaper or on an oven rack to speed up drying. Inserting the dowels: If dowel holes shrink slightly during the drying or baking process, widen them slightly using a screwdriver or sharp knife.
About The Author:
| ||
| Source: http://www.thriftyfun.com/tf57374875.tip.html | ||
|
© 1997-2009 ThriftyFun.com
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately. |