| ||
| Source: http://www.thriftyfun.com/tf58740921.tip.html | ||
Craft Project: Raggedy Andy Pencil HolderBy Harlean Greathouse
Materials
InstructionsSpray the can with the flesh color paint. Let dry. Add features to face with Sharpies, using picture as a guide. Start eyes about 1-1/2 inches from top of can and leave room for the bow tie at the base. Cut the cardboard to fit around the can. A cereal box works well for this. Wrap yarn as shown at right, then sew about 1/4 inch from one edge. Clip yarn along opposite edge, and carefully remove the strip. It will tear along the stitches. It is not necessary to get the strip out along the sewn edge. Turn the can upside down and hot glue the strip around the edge of the can, You may have to hold it in place for a bit until the glue sets. Turn can right side up and smooth the hair so it hangs down. Fashion a Bow from ribbon and hot glue in place at base of the can.The instructions are also in a PDF file for which you may need Acrobat Reader to view. Download Acrobat Reader Click Here to download the Raggedy Andy Pencil Holder Instructions in PDF format. About The Author:
| ||
| Source: http://www.thriftyfun.com/tf58740921.tip.html | ||
|
© 1997-2009 ThriftyFun.com
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately. |