|
| Source: http://www.thriftyfun.com/tf803579.tip.html |
Three-Leaf Clover Pencil HolderBy Teri ClarkMaterials:
Tools:
Steps:
2. Attach the tubes with staples to make a clover shape. 3. Cut out a 4 1/2 x 4 1/2 inch piece of cardboard. This will be the base of the pencil holder. 4. Glue the tubes to the center of the base. 5. Once the glue dries, use the marker to draw a pretty shape for the base and then cut it out. You can use a circle or you can try to make the clover shape or you can just use your imagination! 6. Paint the pencil holder both inside and out. Now all you have to do is gather together all your pencils and keep them in the holder you have created! Additional Ideas: Consider adding more tubes to create a bigger holder. You might even want to cut down a few paper towel tubes to give your holder different dimensions! About The Author:
|
| Source: http://www.thriftyfun.com/tf803579.tip.html |
|
© 1997-2009 ThriftyFun.com
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately. |