Craft Project: Patch Potholders
|
| Patch Potholders |
Use those scraps of material for a quilted potholder.
Approximate Time: At least an hour.
Supplies:
- 1- 8 inch circle of blanket material
- 8 - four inch squares of three different color materials folded into triangles.
- 1 - 28x4 inch strip of material to make 1/2 inch seam binding
- 1 - 8 inch circle of material for the backing.
- 1 2 inch scrap of material for the center.
Instructions:
- Cut all your materials to the "rough" inch dimensions.
- Locate the center of the blanket circle and lay the 2 inch scrap of material there.
- Pin four 4 inch squares of material that you have folded into triangles. Sew down. Then remaining four over the first and sew. Row one completed.
- Row two is 1/2 inch back from the points of row 1. Sew the first four over the original four you sewed, then sew the remaining four to complete the row.
- Sew row 3 3/4 of an inch back from the points of row 2 in the same manner.
- Trim the edges of the triangles to match the circle of blanket.
- Sew the circle of backing material to the back. (I do not use the same color as the seam binding.)
- I use a hand crank sewing machine, so I hand sew the seam binding onto the material.
- Your potholder is now ready to use, give as a gift and always machine washable.
By Tedebear from San Jose CA
|
|
© 1997-2009 ThriftyFun.com
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.
|