|
| Source: http://www.thriftyfun.com/tf963526.tip.html |
Glowing GoblinsBy Rondi Hillstrom Davis and Janell Sewall OakesSupplies
Directions 1. Adhere stickers onto the outside of the votive OR If using stencils or stamps, paint heavily enough that no light shines through the shapes. Let dry completely. 2. Mix glue and water. Paint glue onto the outside of glass, on top of the stickers. 3. While the glue is wet, layer pieces of tissue paper and glue until the entire votive is covered and the tissue is saturated. 4. Turn the votive upside down to dry (a hairdryer speeds up the process). 5. Once dry, add a tea light and let the glow from these festive candles welcome the neighborhood spooks. About The Author:
|
| Source: http://www.thriftyfun.com/tf963526.tip.html |
|
© 1997-2009 ThriftyFun.com
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately. |