| ||
| Source: http://www.thriftyfun.com/tf97667605.tip.html | ||
Recycled Hanging Planter
You'll need:
With a hammer and nail, poke three holes around the top ridge of the can, with each hole being the same distance apart as other holes or else the plant won't hang right. Cut three pieces of cord, all the same size (whatever length you choose). Tie one cord to each hole with a few knots so it's secured well. Bring the loose cords together and tie them together with a big knot. Then a bit higher close to the top, make another knot. Now you have a secured hole to hang the plant. Decorate with stickers,glitter or anything else you have on hand. Put a nice small plant in there (make sure it is already in it's own container, the hanging planter is just for decoration. This would be a great craft for kids/parents to do together! By Lisa from Halifax, NS | ||
| Source: http://www.thriftyfun.com/tf97667605.tip.html | ||
|
© 1997-2009 ThriftyFun.com
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately. |