Inexpensive Drapery Rods
|
Instead, I bought drapery 2 rod finials (the ends) for $6 each, 3 drapery holder/brackets for $4 each and 103 inches of PVC pipe (for $3.50). I hot glued a Styrofoam plug into the ends of the PVC pipe and screwed the finials into each end of the PVC pipe stuffed with Styrofoam. Then I painted the "rod", finials and the brackets with a silver metallic paint and they look like they are made out a brushed stainless steel.
You could use black paint or a wood tone or any color to match your decor. This rod can be used with drapes or swags. In fact, it could even be recycled by changing the color or the finials used.
I spent less than $30.00 and saved hundreds. And they look great.
By Catherine Somerville from Summerfield, FL
Feedback About This Post:
RE: Inexpensive Drapery Rods
I applaud your creativity and thriftiness! I found great deals on rods at Ross, (about a third of the price of Walmart or Home Depot) but if I would have seen this, I may have done it that way. Am wondering where you found finials and the rod holders so cheaply?
Thank you for your great idea!
Post By Christy (Guest Post)
RE: Inexpensive Drapery Rods
I just saw this and I think it is a great idea! I am going to try this. Thanks
Post By sherry (Guest Post)
RE: Inexpensive Drapery Rods
I've done several of these types of curtain rods and have used the heavy round cardboard rolls that fabric comes on in the fabric stores. These cardboard rolls are about 60" long and may be cut with a hacksaw if necessary. I hot glue fabric onto the cardboard roll and rather than use wooden finials I use styrofoam balls (purchased from a hobby store) covered also in fabric & secured with a thick rubber band. Make sure the fabric that covers the styrofoam ball has some tail to it so you can insert it into the end of the cardboard roll; once glued in you'll never see the rubber band. Just hot glue it in and you're ready to hang those great window treatments.
Post By Mary H. (Guest Post)
RE: Inexpensive Drapery Rods
I have seen this done before, but in addition to the rods being PVC pipe, the rings were also cut from PVC pipe larger than the "rod" and a screw-eye attached to each one. They were about an inch wide.
Post By sheila (Guest Post)
RE: Inexpensive Drapery Rods
And I thought I was the MOST value-orientated person in the world. YOU ARE THE WOMAN! Great idea. Just going to have to try this on my front window that is 217" long.
Post By Col (Guest Post)
RE: Inexpensive Drapery Rods
Awsome Idea!
Question. Did you have any problems with the paint coming off when opening and closing the drapes repeatedly? What kind of paint did you use?
Post By Carla (Guest Post)
RE: Inexpensive Drapery Rods
Thank you so much for the idea. I have been struggling with figuring out how to cover my 3 windows (100" +). I think that buying the extra drapery holder/brackets as you mentioned for in between each window is a great idea to keep the PVC from sagging. Thanks for helping me save a bundle!
Post By (Guest Post)
RE: Inexpensive Drapery Rods
good idea...except...wouldn't pvc bend in the middle once you actually put drapery on it? Maybe not for super lightweight, but I can't imagine 100 inches of pvc staying straight with 100 inches of drapery hanging on it...wish there was a pic with the curtains on...
Nice idea though!
Post By someone (Guest Post)
RE: Inexpensive Drapery Rods
Just a quick question.... you said the window was over 120 inches, yet you only purchased 103 inches of PVC pipe? Can you clarify?
Post By Marianne (Guest Post)
RE: Inexpensive Drapery Rods
GREAT idea!! Love saving money but never want it to look cheap. THese look like very expensive curtain rods...I am definitely going to try this idea.
Thanks for sharing this!
Post By Marianne (Guest Post)
RE: Inexpensive Drapery Rods
very cool !
Post by melody_yesterday
RE: Inexpensive Drapery Rods
Thank you so much! I need a long rod that is strong enough to span 240" and it can't be heavy, yours is perfect!!!
Love & Prayers,
Linda
Post by lindaljh1
RE: Inexpensive Drapery Rods
real nice...good ideal ...looks great
Post By nmcl (Guest Post)
RE: Inexpensive Drapery Rods
Necessity has always been the mother of inventions!
You did yourself proud, as Minnie Pearl would say.
Post By Syd (Guest Post)
RE: Inexpensive Drapery Rods
WOW! I am so impressed! I love your ideas and will borrow them for my living room. Creative +. I just love making something from nothing. You rightly should be very proud and thanks for sharing with all of us.
Susan
Post by susan matthews
RE: Inexpensive Drapery Rods
What a great idea! I was thinking that you used a wood dowel, but PVC is so much better--lighter and cheaper. Did you have to use a special paint to adhere to the PVC?
Post By susan (Guest Post)
RE: Inexpensive Drapery Rods
That's a winner!
This could be used for towel rods in the bathroom, too.
Post By the Oracle (Guest Post)
RE: Inexpensive Drapery Rods
You did a great job on those curtain rods! Thank you for posting a picture and telling about them. I may make some for my living room!
Post By Vickie (Guest Post)
RE: Inexpensive Drapery Rods
What a wonderful idea!!! We bought 5 curtain rods and I wanted my husband to put them up before Thanksgiving - - they are going back!
Thanks, Gisela
Post By Gisela (Guest Post)
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.