Source: http://www.thriftyfun.com/tf18601038.tip.html

Using Foam Brushes To Refinish Tub

Why can you not use foam paint brushes to apply tub refinisher?

Clayton

Feedback About This Post:

RE: Using Foam Brushes To Refinish Tub

Foam brushes leave a little 'air pocket' in which the water will sit in after you drain your tub.This is where it will peal first and likely leave a bigger mess than you started with, especially if you are using a different colour paint. It is best to use a spray gun. I've used Krylon paint with great success. Good luck.
~PHH

Post by Princesshammerhead

RE: Using Foam Brushes To Refinish Tub

According to the link below you cannot use a foam brush because the solvent will eat throught it

http://www.swingpaints.com/message_directory/301.shtml

Post by Kaelle

Source: http://www.thriftyfun.com/tf18601038.tip.html

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.