Using Original Pictures For Decoupage
Jean from Wisconsin
Feedback About This Post:
RE: Using Original Pictures For Decoupage
Chances are, you can. It depends on what medium you are using--most of the "modern" ones (like Mod Podge, Royal Coat, etc.) would work with photos printed from the real photo process. However, you really should use a "scrap" photo--preferably from the same developer, to check this. You can just decoupage it to a piece of cardboard if you want. You want to be sure the colors don't run. If the prints were done with an ink-jet printer, they may run.
Most recommend using a copy for several reasons: one, the copy is generally thinner, and won't take as many coats of medium to blend in; and two, they don't want to see people damaging a potentially irreplaceable photo.
Post by Jilson
RE: Using Original Pictures For Decoupage
The biggest reason is the thickness of the photo and the huge number of coats of medium it would take to get to a level plane. However, if you use the pour-on two part medium (resin) found in craft stores, you can do 100 coats in one (equivalent). You can even imbed shells and other three dimensonal objects. If you are doing a plaque of wood though, you will have to pour it on and realize that you are going to lose a lot in a drip tray. If you use something that has a containment edge (like a tray), then your pour might be more economical. Hope this helps.
Post by Lady BE
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.