Source: http://www.thriftyfun.com/tf25543156.tip.html

Craft Project: 3D Snowflakes

These beautiful snowflakes can be whipped up in a matter of minutes. They are so quick and easy to make, you will want to fill every window or hang from every ceiling!

Supplies:

White paper, wax paper, tissue paper, etc.
Hole punch
Stapler
Scissors
Tape

Instructions:

You can use different types of paper to make these snowflakes. If you are using an 8 1/2 x 11 inch piece of paper, fold the paper in half lengthwise and cut in half so you are left with a 4 1/4 x 11 inch strip of paper. You could also use a similar size piece of wax paper or tissue paper. I found that the lighter the material the easier to hole punch.

Fan fold the paper using the shorter edge. Once it is all folded, put a staple in the middle.

Use scissors to trim the two edges if you wish. Make it rounded, cut off to form a point, make another design, or leave it the way it is. Every snowflake is unique!

Use a hole punch to make a design of holes all over. I had two different size hole punches.

When you are finished adding design, fan out the two sides to form a circle and tape together.

These are beautiful hung in a window or from the ceiling! Enjoy this last bit of winter season.

By Jayme from Harrisonburg, VA

Feedback About This Post:

RE: Craft Project: 3D Snowflakes

They are so nice.

Post by Delilah500

Source: http://www.thriftyfun.com/tf25543156.tip.html

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.