Creating Shades for Skylights

Feedback About This Post:

RE: Creating Shades for Skylights

What we used till we got a new and tinted sky light installed over the older & clear one, when we got our new roof, was a piece of cardboard cut just a bit past the size of the skylight. We pushed the cardboard into the skylight & it hung there perfectly, till we took it down. Very inexpensive!!!

Post by badwater

RE: Creating Shades for Skylights

If you want to go fancy they do sell shades made for sky lights.
Here's a few links for you. Obvously they'll have different price ranges but at least you'll have a better clue of what's available out there. Hope they help you figure out your best option.

http://www.skylightheatblocker.com/

http://www.draperinc.com/Window_Shade_Pages/Skylight_FlexShades.htm

http://www.sunporch.com/Content.aspx?pageid=OptionsClimateControl

http://cellularwindowshades.com/balcony_skylight_shades.html

Post by michellejones3

RE: Creating Shades for Skylights

Hi there my mom is using dollar store/tree umbrellas to put in her skylights says it works great, just cannot be superstitous about opening an umbrella in the house. Good luck they are available in lots of neat designs or solid colors.

Post by Ladylynnk

RE: Creating Shades for Skylights

i got some wonderful stuff from either mileskimball . com or lillian vernon . com. anyway it is like cling on material but it looks like sunglasses-see thru gray. i have put it on 3 windows that get lots of sun. i hope it works. look under window or curtain on line at those sites.

Post By sandy (Guest Post)

RE: Creating Shades for Skylights

I also have this problem and I used two spring form rods with a fabric of your choice. It works very well.
Measure fabric so it fits very close to the edge of the skylight and you will be very pleased. Of course this requires a very tall ladder but I keep mine up until fall.

Post By Annie (Guest Post)

RE: Creating Shades for Skylights

I took apiece of 2inch thick styrofoam insulation and cut it to the size of the skylight. Covered the sides with duct tape, and it slips in perfect. I used the white kind so it still lets in some light.
Quite a difference.

Post By Tom Mann (Guest Post)

RE: Creating Shades for Skylights

I have been consideringthe same thing...and was thinking of using small spring tension rods. Two per window, and either buying "door panels" or making curtains out of sheer fabric - with a rod pocket at both ends. The spring rods wont damage the surrounding framework, and can be removed at any time.

Post By chris (Guest Post)

RE: Creating Shades for Skylights

You could use fabric held up with hook and loop tape.

Post by freemoneymama

RE: Creating Shades for Skylights

I would probably buy and inexpensive roll up blind, unroll it, neatly cut off the excess at the hardware end and with small thumbtacks attach the shade to the outside framework, you would only need a few thumbtacks, the shade is light, usually paper or some sort of nylon or something,
that would leave light in but help the heat. I hope.
tam

Post By tammy (Guest Post)

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.