Removing Rust from Cast Iron Pan

Feedback About This Post:

RE: Removing Rust from Cast Iron Pan

Cast Iron pans often rust. Wash the pan with soap and water then rub it with cooking oil to season it.

Post By Biblequest, Seattle (Guest Post)

RE: Removing Rust from Cast Iron Pan

My mom has had her skillet since 1954 when she got married. She washes it with soap and steel wool when needed and has never had a problem. She stores it in the oven because that's where she has room for it. She doesn't oil it or anything else, but I can say that they aren't made now the way they were then. I had one purchased in 1977 and I never could get the quality use out of it that she gets from hers. Luckily, her's will be mine one day.

Post by melmarr

RE: Removing Rust from Cast Iron Pan

I am a southerner and I inherited my Mom's cast iron. Whatever you do, NEVER wash with soap and water.

Anyway, to get back to your question of rust. When I was younger, I didn't use the cast iron right. I washed with soap and water and would go for eons before using. I thought I had ruined Mom's piece. I found out that if you have a self-cleaning oven, this will do the trick.

My Mom's pan had rust and large areas of thick rust build up. I put it in the self cleaning oven (probably easier than a fire, if you have the self cleaning oven). I set it for about a 2 hour clean cycle. This removed the thick build-up stuff and about 98% of the rust. I then used a steel wool pad to remove the rest of the rust by just scrubbing.

Once it was smooth and clean, I began the re-seasoning process. Many people use vegetable oil, but this is what makes cast iron get sticky. Use only lard, and you will NEVER AGAIN have problems with your cast iron. Coat the entire surface of the pan with lard. Place in a 200 degree oven for about an hour. Remove and repeat this process once or twice more.

Then, to get the really good seasoning in, use on the stove to cook in. I just put a lot of butter in and fry my eggs for several days; cook bacon...etc...anything with a lot of fat to help build up your non-stick surface.

To clean after you've gotten it de-rusted and re-seasoned, use spatulas to remove anything stuck, which may happen until the really good seasoning is on it. Then, I use a paper towel to wipe off the inside of the pan. Once in a while, if it has a lot of cooked on food, I only use a damp washcloth (no soap) to wipe it out, then place on the stove with the unit on to completely dry the pan out.

Finally, after mild wiping, I spread more lard in and around. I always store my pans in the oven (I have since found a couple small ones in thrift stores and done the entire de-rusting, re-seasoning process with them). Good luck and happy cooking!

Post By Tina (Guest Post)

RE: Removing Rust from Cast Iron Pan

The advice I read here on removing the rust is what I have done in the past. Then you can also follow the directions for coating the pan with oil or shortening and letting it sit in a 300 degree oven for several hours to seal the surface of the cast iron so it doesn't rust again. I wouldn't use cast iron for years because that seemed like too much trouble. But once you get it seasoned it is actually very easy to care for. Unlike some of the other posts, I do wash my pans in dishsoap and hot water. Then I put it on a burner on medium until it dries then I put a little olive oil or spray non-stick spray into the hot pan and let it heat for a minute. When it is cool I wipe out the excess with a clean coffee filter and then I keep the coffee filter in the pan between uses to protect it and prevent rust.

Post By mom3 (Guest Post)

RE: Removing Rust from Cast Iron Pan

I still use my mom's iron skillets from where she used them when I was a small child. And I'm 52. I wash my iron skillets like any other pot, soap & water and all. Rinse really well, then dry with paper towels, (because they get black), then I air dry them before I put them away. Now for the rust, that has happened to me when they were stored somewhere damp, (by the way if you're going to store iron skillets, rub some cooking oil all over them, and wrap them in newspapers, that will keep them from rusting.)...

But, I have had the chance to inherit old rusty iron skillets because someone thought they were ruined. I take an old fashion metal pot scratcher, like the kind you buy at the store with silver or copper colored ones. I run some hot water in the skillet, and be where you can clean a mess up. And scrub and scratch that skillet with the scratcher, even if you have to hit the bad spots with a knife. Scratch it until you are down to bare iron skillet. (messy job)...

When it's all clear of rust, wash it. Now to "season" it, so it will stay clear, and you have a useful cooking skillet. (I do all my cooking just about in iron skillets, and iron pots). Rub it down with cooking oil, inside and out. And put it in an oven at low heat oven. Like 200 - 300. Don't want it to smoke. And bake it for at least 3-4 hours. If it trys to come out rusty, take it out, let it cool, then rub it down in oil again, turn it over on a newspaper, and let it finish "seasoning".

I know the old timers did this in a fire, I've never had that chance, since I was a city dweller. I love cooking in my iron skillets, and since I learned to wash them like any other pot, just make sure they are rinsed well, and hand dried well, and most of all , air dried well, before putting away your iron skillet. If it does rust a little, get out the old metal pot scrubber and some hot water, and scrub it, rinse it, dry it, air dry it, and oil it. But, I only oil it if I see a small spot of rust. The only time you really have to "season" it, is when it is covered in rust, or mostly covered, and hasn't been used in a long while.

It's hard to kill an iron skillet, I haven't been able to ruin mine in any way in 34 years of marriage. Some folks rub a little oil, and put a paper towel in their iron skillet to stack them for everyday use. I just paper towel dry mine, then air dry them, and stack them up. But, I use mine on a daily basis. Hope this helps.

Post By glinda (Guest Post)

RE: Removing Rust from Cast Iron Pan

This is called seasoning a cast iron fry pan.To season a pan, preheat your oven to 300°F (150°C). Remove the rust with either salt or steel wool. Then preheat the pan on the stove top.

When warm, coat the inside surfaces of the pan with vegetable oil or lard. I prefer good old solid Crisco. Sometimes using liquid oil can leave a sticky finish.

Continue to heat just until you see ripples appear on the surface of the oil. At this point, pour off any excess oil, give it a quick wipe with a folded paper towel held in a pair of kitchen tongs, and then put the pan into the oven for 45 to 60 minutes. Remove the pan from the oven and allow it to cool to room temperature.

Seasoned pans should not be washed in the dishwasher or scoured with abrasive cleaners or pads, as this will remove the coating. Wash in warm water with a small amount of dish soap and dry immediately. I place mine for a short period on a gas jet and feel it after cooling down to assure dryness.

Eventually the seasoning will wear off in areas. You can tell that this has happened because food will start to stick or rust spots will appear. When this happens, clean the pan well using a steel wool pad, and then re-season it.

Post By angellface (Guest Post)

RE: Removing Rust from Cast Iron Pan

Do the oil trick and don't wash your pan in soapy water ever, removes the coating that you have built up over time and then you get rust.

had the same cast iron frying pan for (OH MY GOSH) 30 years and never had to do more than wipe it out with paper towels, or at one time in the middle of no where, grass, still came up good as new.

and still not sticky.

Post by dekelder

RE: Removing Rust from Cast Iron Pan

The easiest way is to toss it into a fire (fire place or campfire). This burns off all the residue. Then just coat it with Crisco and bake in the oven to reseal it.

Post By Osa (Guest Post)

RE: Removing Rust from Cast Iron Pan

I don't care for steel wool so I take dry salt and put some in the skillet and use a paper towel to scrub the pan till the rust is gone. Then I put a little oil on it and put it in the oven to store

Post by Marcia S

RE: Removing Rust from Cast Iron Pan

After you steel wool it, spread a thin layer cooking oil on it and store it in the oven, that will keep it primed for the next use and bake on a coating that will help it to be non-stick and protect it from any rusting.

Post by melmarr

RE: Removing Rust from Cast Iron Pan

Easy. Just use steel wool and water. It works well and I just did this yesterday when my sister gave me a cast iron pan.

Post By Beth (Guest Post)

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.