Instructions for Making a Tin Man Bird Feeder out of Tin Cans

Feedback About This Post:

RE: Instructions for Making a Tin Man Bird Feeder out of Tin

Thanks I just wish we could see the feet.

Post By Barb (Guest Post)

when does the bird seed go

just wondering where the bird feed goes

Post By tammy (Guest Post)

RE: Instructions for Making a Tin Man Bird Feeder out of Tin Cans

I WAS WONDER HOW TO GET THE PATTERN TO MAKE TIN MAN BIRD FEEDER I MADE THE TINMAN TO HANG UP AND I WAS WONDERING IF I TURN IT UP AND CUT HOLES IN IT TO MAKE IT

Post By BRENDA, EMAIL BREYECTRL@AOL.COM (Guest Post)

RE: Instructions for Making a Tin Man Bird Feeder out of Tin

Make Our Tin Man!

SUPPLIES:

- Awl or Ice Pick
- Heavy Wire or Clothes Hanger
- Wire Cutters
- 2 - 1" Wood Screws
- 1 - 1/2" Metal Screw with Nut
- 2 - 1" Moveable Eyes
- 32 oz. Coffee Can
- 13 oz. Coffee Can
- 20 oz. Fruit Pie Filling Can
- 4 - 15 3/4 oz. Vegetable Cans
- 2 - Sardine Cans
- 4 Soft Drink Cans
- Krylon® Silver Spray Paint
- Acrylic Paint - Black, Red
- 6" Funnel

DIRECTIONS:
1. Open tops of each can and remove contents. Drain cola cans. Spray all cans and funnel with silver paint. Spray funnel inside and out. Let dry completely.

2. With an awl or ice pick, punch holes in vegetable cans, each side, 1/2" from top and bottom. Punch holes in the cola cans, each side, 3 1/2" from the bottom. Turn vegetable cans upside down over the cola cans until the first set of holes on the vegetable can meet the holes on the cola can. Run a 3 3/4" piece of wire through both cans; bend ends of wire. You have just made the arms and legs.

3. Turn sardine cans with open side down (feet). Place each leg combo on the backside of a sardine can. Run wood screw from open side of sardine can through bottom of cola can to attach feet to leg.

4. Turn the 32 oz. coffee can (body) upside down and punch a hole in the center bottom. Punch holes on each side, top and bottom, 1/2" from edge. Punch holes in the fruit can (neck) 2 1/2" from the bottom on each side, and one hole in the center of the bottom. Set neck right side up on the body. Bolt together using a screw and nut.

5. Punch holes in the 13 oz. coffee can (head) in the center bottom and on each side 1 1/2" from the open end. Cut a 20" piece of wire, bend one end. Run up through can, leaving bent end inside can. Drop funnel (hat) upside down over wire and let slide down to rest on top of the head. Curl the top of the wire; this will prevent the wire from coming out and will also be your tin man's hanger. Place the head down over the neck until the holes meet. Run a 4 1/2" piece of wire through the holes; bend at both ends.

6. Place legs inside open end of body and attach a leg to each side of the body by running a 7" piece of wire through holes. Bend wires at the end. Arms are attached to the outside of the body with a 13" piece of wire.

7. Glue the eyes approximately 1 1/2" from the top of the head. Paint nose, mouth, and ears. Three 1" crcles (buttons) are painted on body. All are black. A red heart is painted on the left side of the chest.

Post by reeteeod

RE: Instructions for Making a Tin Man Bird Feeder out of Tin Cans

Post by johnson1976

RE: Instructions for Making a Tin Man Bird Feeder out of Tin Cans

I have seen the tinmen for sale in the window here.
http://www.cubbyholepottery.com/gifts.html

Post By Bonnie (Guest Post)

RE: Instructions for Making a Tin Man Bird Feeder out of Tin Cans

I too would love the info on making one of these !!!

Post By Rosa (Guest Post)

RE: Instructions for Making a Tin Man Bird Feeder out of Tin Cans

I have a friend who makes them, if you could send me your address I will pass it on to her.
ladyshamrock@excite.com

Post By Gladys Collins (Guest Post)

RE: Instructions for Making a Tin Man Bird Feeder out of Tin Cans

I WOULD LIKE TO HAVE THE PATTERN OR INSTUCTION FOR MAKING THE TIN MAN BIRD FEEDER. THANK YOU
SHADOWL

Post by SHADOWL

RE: Instructions for Making a Tin Man Bird Feeder out of Tin Cans

Here is a pic I found!! I want one too!
http://www.voy.com/101077/3.html

Post By Lynn (Guest Post)

RE: Instructions for Making a Tin Man Bird Feeder out of Tin

Go here for MANY, MANY bird feeders including a tin can one.
http://www.agriculture.purdue.edu/fnr/wildlife/PDFfiles/NCR338.pdf

Post By Mari (Guest Post)

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.