Redoing Fake Butcher Block Counters

Feedback About This Post:

RE: Redoing Fake Butcher Block Counters

We just completed a countertop refinishing project with a product called Spreadstone (by Daisch Coatings). We had ugly, worn out teal formica that I simply could not look at anymore, and for $150 we got a brand new, faux-stone finish that we are very pleased with. The process is so easy anyone can do it: you sand your old counters with 40 grit sandpaper (don't cheat this step - it is by far the most important! I orginally bought 60 grit because the store was out of 40, only to find myself back at a different store because the 60 wasn't doing the job), prime them with Daich's textured primer, roll on the Spreadstone (which comes in many colors and has the consistency of wet sand), smooth it with a trowel, and then seal it with the corresponding Epoxy Sealer. The whole process took us about 4 days, but the time was well worth it. We intend to completely replace the counters someday, but this will surely get us through until then!

Post by ShoeGal81

RE: Redoing Fake Butcher Block Counters

Sandy go to (Painting Laminate Counters) you will see what Myself and a lot of other Forum Friends have done to our counters

Gail

Post by GMILES7854

RE: Redoing Fake Butcher Block Counters

Black, red, and cream is always a classic color scheme and goes with the oak of the counters. Paint your walls cream and consider what accents you can add in black and red such as towels, canisters, appliances, cabinet doors, handles.

Post By Annon (Guest Post)

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.