Repairing Dining Room Chairs Vs. Buying New
|
The dining room table is still very sturdy. Although, the wood in the chairs and the table match in color, the style isn't an exact duplicate. It simply 'goes together' and was purchased as a set years ago. Suggestions? Comments?
Are you going to tell me that the quality available now is not comparable to this set and that the chairs should repaired at any price? Right now, they are probably not safe to sit in and will require re-caning and re-gluing.. Maybe even some dowel repairing. I'll have the repair person take apart the two that are still holding up, because they are now unsafe. I am thinking this is going to run hundreds of dollars no matter what I do.
Holly from Richardson, TX
Feedback About This Post:
RE: Repairing Dining Room Chairs Vs. Buying New
Holly,
You can find directions on the internet for repairing caning yourself there are kits etc out there that can help you. If your chairs are from the 20's they may be worth more than you think they are. Where yours is in the shape that it is in though I would probably go with cutting a piece of thin plywood to fit the wood and upolstering it. As to replacement cost versus repair cost you need to realize somethings and decide what is important to you. Finding good furniture that is actually solid wood and well made these days is very difficult to do if you are buying new. There is no longer really a good quality economy version its either expensive solid wood or cheap particle board covered with veneer. Repairing chairs really isn't that hard you don't have to hire someone to do it unless you have an ornate and extremely valuable antique. Anybody can take a chair apart sand all the joints and put it back together with dowels etc and glue and clamp it its not as difficult as it seems. There is also a glue that you used to only be able to get in Canada that you put in the joints that actually causes them to swell and fit again I don't remember exactly what its called something like Yancys. Learning simple furniture repair is really just a matter of a little internet and Library research. If you really don't like the chairs though why not just give them to Charity and seek out a good used set, or check the Pennys catalogue they often have good sales on medium quality furniture but for a decent set for six you going to pay at least 900 dollars also check ebay sometimes even with shipping it can be worth it if the quality is really good. However in the spirit of thriftiness and self sufficiency I would see about learning how to repair chairs myself. As it sounds to me like all they need is to be taken apart the joints sanded and a swelling wood glue used along with dowels to make the joints tight. Good luck!
Post by tigra
RE: Repairing Dining Room Chairs Vs. Buying New
Thank you so much for the ideas. I have pillow cases that we no longer use, but are still in good shape, so I am going to try this. Thank You, thank you, and thank you!!!
Post by jmz2005
RE: Repairing Dining Room Chairs Vs. Buying New
This is in response to jmz2005 and the broken cane backed chair. Maybe you could make a slip cover (like a big pillow case) and slide it over the back of the chair to hide the broken part. Or, cut fabric to the shape, fold over the cut edge, and hot glue it all around the broken cane. If you have a thin, flat piece of wood cut it to the shape of the chair back, cover it with batting, and a piece of fabric over that, turn it over and staple all around the fabric pulling it nice and smooth. Cut another piece of fabric a little larger than the replacement board, fold over the cut edges and glue the fabric down. Use small nails or even reupholstering tacks to attach it to the chair. When I say to use fabric, you could use anything you already have like old sheets, or old draperies. I saw furniture covered once with denim that had been cut from jeans and sewn into strips to form a big sheet of denim, then that fabric was made into cushion covers. I recently recovered an old 1950's upholstered chair with a gingham sheet and it came out really nice. You never know what you can do until you try.
Post by Persnickety Paula
RE: Repairing Dining Room Chairs Vs. Buying New
I have the same chairs with the same problems. Paula is right about how to repair these chairs. I used fabric covered wood. It worked just fine & looks great.
Post by sotmog
RE: Repairing Dining Room Chairs Vs. Buying New
I have chairs just like this and my dd fell backwards in one and broke the "caning" in the middle of the back. We dont have money for new or to have a professional repair them. The chairs are still very sturdy, so I would like to know what an alternative would be to fixing or masking the problem, that would not cost me. We are squeezing pennies till Lincoln screams, so any free/cheap ideas would be greatly appreciated. Thanks!
Post by jmz2005
RE: Repairing Dining Room Chairs Vs. Buying New
We used some old oak chairs of my grandparents for many years. They were part of a kitchen set from the late 30's. I also had the table but one day it just split in two. My grandmother had kept laundry detergent and other "junk" on it in her basement for too many years. Well anyway, my husband refinished the chairs and I recovered the seats and those chairs were put with a unfinished round pedastal table my husband finished off. We used those same chairs for roughly 25 years. My hubby had done repairs to them over the years, tightened them up and such till they could be tightened no more. I recovered the seats more than once too. I then bought a new kitchen table and chairs and donated the old ones to charity.
My advice would be to go buy a new set if you can afford it or look in the paper or thrift shops for a new set. If you can't repair the chairs yourself, it will be very costly to hire it done. If the chairs do not have sentimental value to you, you may as well replace them. I'd replace the table too. Get a whole set that matches...you only live once.
I used those old chairs of my grandparents so many years when I'd probably rather have had something nicer....we could have afforded it but just didn't get around to it and kept using what we had.
Life's too short not to have something nicer, something safe to sit on and eat at....something you can be proud of when you have company.
Just my humble opinion :-)
Post by Debbie52
RE: Repairing Dining Room Chairs Vs. Buying New
Holly, Hi. I like Paula's ideas about replacing the cane with other materials. Have you given any thought to taking a refinishing class at a local community college or tech. school? The cost for such a course would be minimal and you could learn to refinish your chairs instead of trying to replace them.
Good luck!
Cheers,
Rose Anne
Post by wordswork
RE: Repairing Dining Room Chairs Vs. Buying New
Hi Holly,
I can understand your dilemma about your dining chairs. I had a set that my Grandmother had given me that was about 40 years old. I stripped and refinished the table and the hutch but I didn't bother with the chairs. They were very wobbly and I sat on one, it broke, and I ended up on the floor! I think that the cost of professional repair would be too high, and you could buy new chairs for the price of the repairs. I do think, though, if you were going to do the repairs yourself it would be worth keeping the old set. Instead of re-caning the backs of the chairs maybe you could cut wood to fit and upholster over it and re-upholster the seats to match? I certainly think that you should get a quote from a professional refinisher about your chairs and then with that price in mind go to the furniture store to see what new chairs would cost you.
Post by Persnickety Paula
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.