Repairing a Tear on a Microfiber Sofa
Janet from Palm Beach Gardens, FL
Feedback About This Post:
RE: Repairing a Tear on a Microfiber Sofa
I bought an over sized chair little over a year ago. It's microfiber and comfortable. The one good thing about it is that microfiber is known to charge ipods, cell phones, and similar items.
the drawback is that we have major large rips in it due to my dog. About a month ago my dog was left at home during a thunderstorm and she went nuts I guess, because one of the things she ripped up was the chair. I can not figure out how to repair, except what the furniture store told me was Instant Glue. but on a chair it would feel uncomfortable to sit on. Here is a close up picture of what it looks like now.
Post by danielle415
RE: Repairing a Tear on a Microfiber Sofa
Avalinejet: Don't worry, the Fabri-Tac won't dry very stiff. But, Don't apply the patch on the outside, do it from the inside of the "velveteen" type fabric. (It'll stick much better & look better too!) Just make sure your inside patch is about an inch bigger than the tear. A cut up old pillow case or sheet will work for the patch. To do a nice job, use a fabric marker pen, acrylic paint or a permanent marker to color the patch to match the couch fabric first. That way, if part of the patch shows through a bit, it'll still look okay. Then with something sharp (like a knitting needle, crochet hook or a pen) push the patch inside the tear. (A butter knife might do also the trick to wedge the patch inside the tear) Next squirt just a little of the Fabri-tac on top of the patch (a little goes a long way). Try not to get glue on the velvet outside the tear. Then press down on the glue & the patch w/ your fingers or something like a crochet hook or the tip of a butter knife. You should probably set a thick phone book on the tear while it dries, but make sure to put a piece of tinfoil or wax paper between them so the phone book won't stick to the sofa!
Post by Cyinda
RE: Repairing a Tear on a Microfiber Sofa
Cyinda, I have a tear in my loveseat, but it's not microfiber. It's a soft fabric with a velvety feel, but it isn't velvet. I am pretty sure I would not be able to successfully apply heat to it. I am wondering how the fabri-tac would work. In my case, the tear is several inches one way and about 3 inches another, so that the foam beneath is exposed. I'm not real concerned about looks since we don't often have visitors, but I am wondering if the fabri-tac would look bad or feel hard if I just put a patch of fabric over the outside of the tear. ???
Post by avalinejet
RE: Repairing a Tear on a Microfiber Sofa
An alternate way might be to take a tiny piece of fusible webbing or fusible interfacing (ask for it in the cutting department of a Fabric store) You'd slip this inside of the tear. If you choose fusible interfacing you'd need to make sure the fusible side was UP (towards the microfiber) Then instead of actually touching it w/an iron, you'd need to hit the microfiber w/only steam (to fuse it to the interfacing) OR you could use a Teflon pressing sheet. but do NOT press directly on the microfiber w/you iron. You may be able to just barely touch it w a curling iron, But, I'd try fusing the interfacing to the microfiber w/steam first.
* This MAY be a lot less messy than my previous post, but it won't be as permanent as the Fabric Glue method.
Post by Cyinda
RE: Repairing a Tear on a Microfiber Sofa
Go to Walmart or any craft or fabric store & buy a bottle of "Fabri-Tac" fabric glue for under $5. It's the brand in a clear bottle. I like it because it's one of the strongest brands & one of the only brands that says it can be machine washed, machine dried, AND also dry-cleaned, plus it's the fabric glue that most pros use. (Use it later to hem & patch your jeans!)
---> Next, you need a small piece of a med weight woven fabric (like muslin for example) (cut it just a little bigger than the tear) You'll have to tuck the piece of fabric in & UNDER the tear. Then squirt in a TINY bit of the Fabri-Tac glue, then wait about 1 minute until the glue is slightly tacky, then carefully press the torn microfiber to the glued piece of (muslin) fabric.
* Try to not get any glue on the top side of the microfiber. If you do, you may be able to wipe it off w/a damp Q-tip before it dries.
Post by Cyinda
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.