| ||
| Source: http://www.thriftyfun.com/tf46051112.tip.html | ||
Craft: Gourd Witch
DO ALL OF YOUR PAINTING AND LET DRY BEFORE YOU PUT YOUR WITCH TOGETHER While you are waiting get together your materials you will be using. Materials
InstructionsPaint the pot and face on the gourd. Let dry Cut the styrofoam for the arms to match the size of the pot and head. You don't want it to look out of proportion (lol), and the same with the her legs and feet which is all one piece, then paint. Cut the black material for her cape (make a small band at the top of it and thread a black string through it and tie it on the neck. Connect the legs to the pot, attach a piece of wire hanger across the hole in the bottom of the pot, then bend the leg wire in half over the cross wire. Now attach the legs to the wire by putting a little adhesive on the top of the legs where you are going to push the wire into the middle of the length of the legs. ENJOY YOUR CRAFTY WITCH. By Crafty Billie from Stockton, CA Feedback About This Post:RE: Craft: Gourd WitchShe is just to cute, looks like a lot of time went into her.. Post by krafty sheri | ||
| Source: http://www.thriftyfun.com/tf46051112.tip.html | ||
|
© 1997-2009 ThriftyFun.com
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately. |