Sea Shell Wind Chime Instructions
Thanks to anyone who can help,
Brittany from Florida
Feedback About This Post:
RE: Sea Shell Wind Chime Instructions
I just used a glover. This is a three sectioned pointed needle used with leather. My crab shell did not break due to the sharpness of the needle. For thicker shells, ie: mussels, etc. use a fine drill bit. These have worked for me. Good luck.
Post By MotherBear (Guest Post)
RE: Sea Shell Wind Chime Instructions
Use a VERY small drill bit and drill a hole.
Post By Lori (Guest Post)
RE: Sea Shell Wind Chime Instructions
I found it easy to use a dremel tool, to drill the holes in the shells. It works pretty good
Post By connie. (Guest Post)
RE: Sea Shell Wind Chime Instructions
You have too use a small drill bit & you have too turn it by hand or the shell will break. Have fun now they are fun too make.
Post By Joyce (Guest Post)
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.