Tightening Eyeglasses

Feedback About This Post:

RE: Tightening Eyeglasses

Tightening up the screws, and then painting with clear fingernail polish, glue, or some other clear adhesive is supposed to work. The adhesive is supposed to prevent the screw from turning, causing it not to be able to work itself loose. What I do is remove the screw altogether; thread a thin sewing needle with HEAVY-DUTY thread or dental floss, and run it through the screw-holes, and tie it off very tightly. I got to the point where being able to use my glasses was more important to me than what it would look like, but if you use a thread color that closest matches the color of your glasses, then it really is not that noticeable. Just clip the ends of the thread closely after making sure that you have tied it so that you won't have to worry about it coming undone. And a dab of glue on the thread ends makes it even better. Now, I realize that not everyone is going to be able to live with this solution, but it's the best solution that has worked for me.

Post by Anonymous

RE: Tightening Eyeglasses

You can buy pads that adhere to the little pads that rest on your nose. That may help. You should be able to buy them at a Wal Mart or drug store where they sell eye glass cleaners and such.

Post By Harry (Guest Post)

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.