Source: http://www.thriftyfun.com/tf557825.tip.html

Cardboard Tube From A Fabric Bolt As A Curtain Rod

I used the round tube from a fabric bolt for a curtain rod once and it worked wonderfully! I had some contact paper in the wood-look pattern and covered the tube with it and on the ends I poofed up some fabric and covered the ends with it and rubberbands. Being it was a smaller sized window I used one curtain panel and pulled it to one side. It turned out terrific. And best of all, it cost nothing since I had it all on hand.

You can get the cardboard tubes from any fabric store since they throw them away anyway and most are glad to give them to you.

By Kat

Feedback About This Post:

RE: Cardboard Tube From A Fabric Bolt As A Curtain Rod

Can you post a picture of what it looks like? I am curious, for I would like to make one. Thank you.

Post by kvd2241

Source: http://www.thriftyfun.com/tf557825.tip.html

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.