Removing a Logo from a Sweatshirt

Feedback About This Post:

RE: Removing a Logo from a Sweatshirt

I found this sight hoping to get the same info on removing a felt adhesive from sweatshirt material. I decided to just try my luck at it. It seemed it wasn't the end all but will help you get almost all of the adhesive out. I had some leather deglazer, basically acetone and, taking all precautions (protect hands with gloves, ventilated area, don't be near a flame, etc.) I would pour a small amount into a small container, dip an old toothbrush in the acetone and saturate the iron-on, or just the adhesive if that is the only part left. Next take a smooth somewhat sharp kitchen knife (no teeth, not sharp enough to want to cut a tomato with, but sharp enough for a cucumber (don't want to cut into the material beneath)), holding the material taught I scraped the knife with the grain of the material to try to get off as much adhesive/iron on as possible. I had a paper towel to wipe the gunk off the knife with.

There was still adhesive ingrained deep in the material, but this will at least get the material smooth for other cover up ideas.

Post By Enter your name. (Guest Post)

RE: Removing a Logo from a Sweatshirt

I wonder if you could put an iron on transfer OVER the logo - or iron on bondex iron-on fabric and then put on another iron on transfer on top of it? Or you could use the iron on bonding material to weld a piece of decorative fabric on top of it - & use fabric paint along the edges...There are also iron on patterned patches available in craft stores...just suggestions.

Post By Enter your name. (Guest Post)

RE: Removing a Logo from a Sweatshirt

The ironing didn't work with a hat I had, it was too imbedded in the material to iron off without the setting the hat on fire.

http://www.frugalforlife.blogspot.com

Post by FFL

RE: Removing a Logo from a Sweatshirt

I'm going to test this out with an iron and wax paper. I will update you on the result.

Post by FFL

RE: Removing a Logo from a Sweatshirt

I have no idea how you could remove the existing logo but have you thought about applying (or stitching) something different over the top?

Post By jojo (Guest Post)

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.