Source: http://www.thriftyfun.com/tf61528524.tip.html

Black Mold on Tile Roof

In Southern Florida we get these black molds on our tile roofs, and I was wondering if someone has any suggestions as to how to remove them. I've read on this board about various posts offering advice to use a mixture of bleach and water on shingle roofs. How about on tile roofs? And what are the mixture ratios and how long to leave on before rinsing? Thank you kindly.

Investor

Feedback About This Post:

RE: Black Mold on Tile Roof

We got ours off with a pressure washer.

Post By rae (Guest Post)

RE: Black Mold On Tile Roof

If the black stuff is mold the bleach should work. The ratios can be anything from 100% bleach to what ever amount of water you want to use. Spray on and when the mold disappears rinse with a lot of water.The more bleach the greater the risk of staining items you don't want stained. I use a garden sprayer that hooks up to my garden hose but be careful not to spray the bleach and water on anything you don't want to be stained because the bleach will stain. For example I got some on my outdoor metal light fixtures and the bleach permanently stained them. If the black stuff is algae the bleach will not work.

Post By Harry (Guest Post)

Source: http://www.thriftyfun.com/tf61528524.tip.html

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.