Source: http://www.thriftyfun.com/tf65466012.tip.html

Cure for Slow Filling Washer

To save yourself the cost of a repairman, if your washer is filling slowly. Turn off the water at the valve, and take the hoses off and be sure that the connection is clean. When my washer was filling slowly, I did this and found that the hose was partially blocked by sediment. I just cleaned out the sediment, replaced the washer (rubber ring), and reattached the hoses. Then I turned on the water, and it works great.

It saved me calling a repairman to do the same job that I can do for free. Also be sure to periodically take the dryer vent hose off and clean it out well, so that your clothing will dry quicker with the improved air flow.

By Tonya from Martinsville, OH

Feedback About This Post:

RE: Cure for Slow Filling Washer

It is true, the setiment is from hard water, when my husband cleans it out, he says it is calcium deposits from the hot water tank and the hard water. As soon as he beats it out of the hose, the water fills up alot faster. This same problem hinders toliet fill ups also. But, can't be solved as easily.

Post By glinda (Guest Post)

Source: http://www.thriftyfun.com/tf65466012.tip.html

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.