Source: http://www.thriftyfun.com/tf666549.tip.html

Riding Mower Won't Start

I have an MTD Yard Machine riding mower with a Briggs and Stratton engine model # 42A707. It will not crank at all. I have replaced the solenoid and still no crank. I think it's the starter, but I can't get the flyweel off the top of the engine. Does any body know how to remove the flywheel?

By RLPang from Bridgeport, MI

Feedback About This Post:

RE: Riding Mower Won't Start

You dont have to remove flywheel, You should have problem reaching only one of the two bolts the one under the flywheel can be taken off with an open end wrench, once loosened all the way shimmy the starter out.

Post by Bill Wilson 1968

Source: http://www.thriftyfun.com/tf666549.tip.html

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.