Source: http://www.thriftyfun.com/tf82979110.tip.html

Repairing Particle Board Cabinets

Can I get a tip on how to repair a wood composite kitchen cabinet? The door and hinge came off the cabinet base and tore a part of the particle board off with it. How can I repair the cabinet to get the hinge to stay in place? The hole is about a quarter inch larger than it should be.

Al from Tampa, FL

Feedback About This Post:

RE: Repairing Particle Board Cabinets

Try Particle Board Repair kit from VTI 877-729-2738

Post By Gary (Guest Post)

RE: Repairing Particle Board Cabinets

If the holes are only a little too big, use a toothpick or two.

Post by susanmajp

RE: Repairing Particle Board Cabinets

Whoa, MamaKay!!!! Great solution and thanx for the tip!!!

Post by Luvyabye

RE: Repairing Particle Board Cabinets

Get a used golf tee from someone and with a tiny bit of glue put it into the hole where the screw came out. Allow it to dry and cut if off flush with the cabinet. Now you can put another screw back into the hole and it will hold. My hubby is a woodworker and this trick works everytime. Kay

Post by mamakay43

Source: http://www.thriftyfun.com/tf82979110.tip.html

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.