|
| Source: http://www.thriftyfun.com/tf838884.tip.html |
Counted Cross Stitch: Mounting and FramingBy Rachel PaxtonThere are a number of ways you can mount and frame your finished cross stitch projects. Cost is always an issue. Frames and mounting accessories can be very expensive. I've found a couple of ways to cut corners that still produce pleasing results. Frames are easy to find. I like frames of all shapes and sizes - they give your finished projects more character. I often bring them home with no particular project in mind. You can always save them until you need them, especially if they were cheap! One of the best places to find frames is yard sales. You can often pick them up for .35 or .50 each (compared to $5 to $50 at the store). Thrift stores are also a good place to look. When I'm pressed for time I pick up a $2 frame at Walmart. It's not necessary for your frames to have glass. Sometimes I frame my projects with glass in front of them and sometimes I don't. When I'm not going to use glass I make sure to spray the surface of the fabric with Scotchguard to help prevent future stains. I mount my projects in two different ways. You can buy mounting boards in any craft store. There are two kinds-padded and not padded. I've found that the padded ones work great when you have a frame that doesn't have glass. The padding makes the fabric stand out from the frame a little and looks very nice. It's also easier to smooth out any wrinkles in the fabric. I use the non-padded mounting boards when I use frames with glass. The nice thing about the mounting boards is that your fabric sticks to them so it won't move around after your project is mounted and framed. I've found a quick trick that saves you from having to buy the mounting board (if you're using the non-padded kind). The back of your frame is usually a piece of cardboard much like the cardboard the mounting board is made of. I've found you can use spray-adhesive to mount your fabric directly on the cardboard back of the frame. It works great. You can buy two different types of spray adhesive: repositionable and permanent (it's never coming off!). I like the repositionable because you can still move the fabric around until you get it just right. When I've got the fabric where I want it (after measuring to make sure it's centered and also cutting off the excess fabric), I use masking tape to fold over the edges of the mounting board. I get it as close to the edge of the board as possible on the front of the fabric, and fold the remainder to the back. This keeps the edges of the fabric from fraying. Additional Tips:
About The Author:
Feedback About This Post:RE: Counted Cross Stitch: Mounting and FramingI'd just like to comment on the framing suggestions posted at this site. I have 14 years of picture framing experience & wouldn't encourage people to use the sticky mounting boards with or without padding. Eventually the padding deteriorates. Also, after doing all that work I wouldn't want my stitching to come in contact with any kind of adhesive. I recommend using double stick tape on BACK of the board & then stretching the stitched piece around the board. The ideal way is to use the lacing technique but that's much more difficult. Post By Katie (Guest Post) |
| Source: http://www.thriftyfun.com/tf838884.tip.html |
|
© 1997-2009 ThriftyFun.com
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately. |