Crafting With Contact Paper

Feedback About This Post:

RE: Crafting With Contact Paper

I have had the same problem, and I found that putting packing tape on the corners (and fold just like you were folding the contact paper) worked great, and because it's clear no one knows it's there. Hope this helps.

Post by TLin8632

RE: Crafting With Contact Paper

this has nothing to do with contact paper but with covering your night stand. Instead of using contact paper, have you considered shrink wrap? you can buy this at a hardware store, ups store, acutally anyplace that does shipping. You just use a blowdryer and the wrap 'shrinks' around anything you put it on.

Post by SweetCali40

RE: Crafting With Contact Paper

When you are going around corners with Contact paper, you need to cut from the edge of the paper straight to the corner of the object you are covering. Then smooth one edge of the Cp down from the middle of the side and smoothing to the edge of the Cp and working your way outward to the corners. For an inside corner, cut the corner of the Cp on the diagonal and fold the Cp inside; it should line up side by side inside the corner. Always smooth Cp from the center out to the edges, relift/resmooth for major air bubble removal and prick little ones with a pin and smooth. Practice corners by wrapping a sturdy cardboard box and then you can use the box to hide away jewelry, office, sewing or craft supplies and then placed atop the furniture you are covering and you have coordinated accessories!
I love Cp: I have covered those 4 drawer cardboard chests and made night stands that match my bedding (I attached matching fabric with spray adhesive and then sealed it in with clear Cp); I covered all my pantry shelves with the herbal Cp; ruined cherry tabletops have been covered with white marble Cp trimmed at the edge with an Exacto knife and buffed with car wax (or petroleum jelly!) for that marble sheen. You can use tips from wallpaper experts for special situations (corners, how to trim around obstacles, etc.) Have fun!

Post By vamster from Milwaukee WI (Guest Post)

RE: Crafting With Contact Paper

Contact paper is great for FLAT surfaces - but no matter what you do, folding it like that will be bulky & give you unsatisfactory results. You have to apply in flat planes. I would suggest covering the top and then, if necessary- applying the contact paper on the sides and cutting off edges with a razor blade or something like it - Remember, try to apply it flat to the sides of the stand etc. If the stand is laminate - you might be able to touch up the laminate - and only cover the top and sides of the piece. I like to use contact paper to creat faux marble/stone tops to furniture & have done it several times with good results.

Post by pamphyila

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.