Source: http://www.thriftyfun.com/tf96304549.tip.html

PVC Flag Pole

I am trying to make a flag pole out of PVC pipe that goes in the ground. The top is at about a 45 degree angle, and it turns in the wind. Does anyone have instructions on how to make one of these flag poles? Help!

dadmor from Ottumwa, IA

Feedback About This Post:

RE: PVC Flag Pole

I made mine by filling a five gallon bucket with cement and then putting in a pvc pipe. Then I buried my bucket in the yard and I just slide by flag pole into it. I drilled a hole through both pipes and ran a bolt through and put a washer on the other side. Hope this helps!

Post By Debra In Colorado (Guest Post)

RE: PVC Flag Pole

I found these instructions posted online.
http://www.info-res.com/ehill/sxm/flagpole.html

Post by Dibbs

Source: http://www.thriftyfun.com/tf96304549.tip.html

Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.