How to Make Draft Stoppers
Go to hardware store and buy 1/2 inch pipe insulator. It should be less than a dollar for 6 feet of foam insulator. Buy one for each door your going to do. Measure width of door and cut foam 1/2 inch less than that measurement.
Take a 30 gallon garbage bag. Place one cut piece of foam on long end side of bag and roll towards the middle. Tape down. Do the same with the other side, but before taping the second side make sure their is enough room to slip the stopper underneath the door so that each side of door will have insulator on it.
Tape edges so it will run smoothly over flooring. Tadah! Now you have paid $1 for something that would have cost $10 if you had bought on television!
By Emily from Erlanger, KY
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately.