|
| Source: http://www.thriftyfun.com/tf98027171.tip.html |
Breaker Tripping After Having Cable InstalledEric from NC Feedback About This Post:RE: Breaker Tripping After Having Cable InstalledI think you need a new electrician !!! Any electrician who knows their stuff doesn't need to 'wait for the problem to occur' in order to have a clue what the problem is ... Being this is a new home I suggest whoever did the installation find and fix the problem at no charge with threats of the Better Business Bureau, etc if they hum hah around about it !!! Post by Deeli RE: Breaker Tripping After Having Cable Installed
I asked my husband the electronics whiz your question and this is his answer: Post by susan matthews RE: Breaker Tripping After Having Cable InstalledMy first guess would be you have more than your bedroom on that breaker and the cable box is drawing just enough to make the breaker trip when something else turns on,especially a motor such as a furnce blower. Try turning off the breaker and see what else doesn't work besides the bedroom. Otherwise it has to somehow be connected to the installation. Did the installer add straps and drive a nail or screw into a wire causing an occasional short. Post by zoodad |
| Source: http://www.thriftyfun.com/tf98027171.tip.html |
|
© 1997-2009 ThriftyFun.com
Disclaimer: ThriftyFun.com cannot accept any responsibility for any injury or damage that you may cause to yourself, others, or property when following any advice given on this site. Read the full disclaimer: http://www.thriftyfun.comdisclaimer.ldml If you find any information on ThriftyFun.com or in our newsletters that is either erroneous and/or potentially harmful to others, please Contact Us, immediately. |