Try some Spick and Span with a non scratching soap pad. Non scratching pads are available at any super market. 3M is one brand that makes those kind of pads. ... View related article.
Vinyl and wood floors lose their luster over time. You can go to a big box store and buy no-wax products for restoring luster. Bruce's Fresh Finish is one brand. Read the directions. Some of these products will not work over a wax surface. (If water is left on the floor, this means you have a wax finish.) ... View related article.
Yes, it does but check with the manufacturer to be sure. My lady puts her new panty hose in the freezer for a few days before she opens the box. Claims the panty hose lasts longer and fewer runs. I don't know if it works or not. ... View related article.
You could go to a big box store and buy floor polish products made to clean dull vinyl floors. Armstrong is one brand that is applied with a spongrmop. Cost is about $12 bucks. ... View related article.
I refuse to give to any charity that askd me for money. I explain that I have my own charities that I contribute to and I am not asking you to contribute to my charities. I have 6 charities I contribute to every year. ... View related article.
Sounds like my house. My kitchen,bath,garage and outside plugs are all GFI. When I use the outdoor plugs there is no power to some of the other gfi plugs. When this happens I have to go to each plug and press the little reset button. Then everything is fine again. I have had electricans look at this and they can find nothing wrong. ... View related article.
One thought is to take them to a body shop and ask if they could paint them. Body shops paint cars all the time and I know of several who have painted kitchen appliances and other items. I don't think the cost would be prohibitive. ... View related article.
Window tint is not applied with an adhesive so you should be able to start at one corner and peel it off. You could also look in theyellow pages under window tint and give those folks a call and ask for some instructions ... View related article.
You can lightly sand with a fine grit sandpaper. The higher the number the finer the grit. For example 220 grit will leave a finer scratch than 180 grit. I am not a fan of Kliz. I used it once on a table. The top coat would not cover the white Kliz. Had to strip every bit of paint doen to the bare wood. There are better primers you can use than Kliz. After sanding wipe off all the dust,apply a primer then paint with the top coat ... View related article.
