How can I change the pixels and resolution on a fairly new computer tower and an older monitor that was given to me? Web pages are way too big and all my pictures are blurry.
By trex from Quincy, MA
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
When I've had to do this, I:
RIGHT click somewhere on the desktop. A box will open up.
LEFT click on PROPERTIES.
Click on the SETTINGS tab.
And from there the monitor settings can be adjusted. When they are good, click OK.
I hope this helps. Best of luck!
Depending on the monitor type there may have been an accessory program loaded to your PC when you installed the video driver. Activate this program and look around, you may find a place to adjust your resolution and pixel depth.
If you're still having issues with the web pages being too big, do this:
In the bottom right-hand corner of your screen, you should see a number. If it is greater than 100%, click on the adjacent down-arrow and select '100%'. If the text is still too large, go to the top tool-bar and select 'View'.
Then select 'Text' and select which size you want to view your text [from Largest to Smallest]
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
