social

Old Door Knob Keeps Falling Off?

I have a very old door with old door knobs. I never used the door until I got my little rescue Yorkie who loves to go up the stairs and through the door. My problem is that the knob doesn't stay attached even with the setting screws tightened. One side is an old glass knob the other a brass one.

Advertisement



I am afraid the knob will fall off and the dog will be stuck on the other side.
Can anyone help me fix this? Forget replacing the whole set up, this is an old door that is not normal sized and I am not at all handy.

Linda from Brooklyn, NY

Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!

 
February 12, 20090 found this helpful

I meant to add that you would need to remove the loose screw/screws completely, place whatever "filler" material you choose to use into the hole.....then screw the screw back into the hole. You may have to experiment to get the correct amount to fill the hole but not overfill it.

 
February 12, 20090 found this helpful

If it's a screw that screws into another metal part you could try poking a small tuft of steel wool (even a little piece pulled off a new steel wool soap pad...SOS pad) into the hole. Maybe even a small twist of aluminum foil might work although I've never tried it as I always have steel wool handy. This might make the hole small enough to tighten the screw in the hole.

Advertisement

If it is a screw that screws into wood poke wooden match sticks (previously burned !) or several wooden toothpicks (or for a larger hole wooden golf tee tips work well) into the hole to make the screw fit tighter.
Hope these ideas that work for me will help you improvise and find something that will work for you. Good Luck!

 
By (Guest Post)
February 12, 20090 found this helpful

It's the rod that holds the doorknobs together. that the setting screws need to hold to...not sure about how this would work.

 

Bronze Feedback Medal for All Time! 180 Feedbacks
February 12, 20090 found this helpful

Take the whole thing out (both knobs and the connecting rod). Take it to you local hardware or Lowe's and ask them about replacing the rod in the middle...I would guess that time has stripped the notches on the rod and hopefully someone there can just sell you a new rod and all you'd have to do would be to put it back in the door.

Advertisement

Good luck. (My brother tells me me that that is what I have to do with my front door, I just haven't gotten around to it. Maybe this will push me to do it). Thanks

 
February 14, 20090 found this helpful

tennesue you and your brother are absolutely correct. I took the knobs and the rod to our neighborhood hardware store and bought a Progressive Hardware knob and rod set for $9.99. The young lady at the store helped me put it together and instructed me on the way to attach the second knob.
Took maybe 30 seconds and it is working fine!!!!I have another door that doesn't even have the rod or knobs and I am going to go back and get another set for that door.

Advertisement


Thank you and thriftyfun for this excellent site.

 

Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!

 
In This Page
< Previous
Categories
Home and Garden Repair Home DoorsFebruary 12, 2009
Pages
More
🌻
Gardening
🍀
St. Patrick's Ideas!
🐰
Easter Ideas!
Facebook
Pinterest
YouTube
Instagram
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2024-03-16 05:18:24 in 3 secs. ⛅️️
© 1997-2024 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/tf30295163.tip.html