I have a pressure cooker that was used one time after I bought it about 5 years ago. It is like new, even the gasket. However, I lost the pressure gauge and had to buy another one. Unfortunately, the brand is discontinued (Innova), but I was told by another company that they could send one that would work. I am not familiar with these cookers and have lost the manual as well (can't replace it). Can anyone tell me, is the pressure gauge supposed to snap on the lid?
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
Problem solving here--- my giant canning pressure cooker has the gauge that just "sits" on the ?? outlet... it is heavy and that is part of the "works". Try a small amount of water, the rack and a potato in your pressure cooker-- let the steam ecape the outlet at a pretty fast speed, then sit the guage on the outlet. When the guage starts to intermittently jiggle and let steam ecape, turn the fire down to where the jiggle and psst is present but not fast...
I read your previous post and disagree with her directions. There should be a round "post"that sticks up in the middle of your lid to hold the gauge. The gauge has 3 different Pressures depending on what you are cooking. You are to put the gauge on immediately and heat until the gauge starts to jiggle. Turn the heat down until it only jiggles two or three times a minute.
Continue cooking according to the time specified in the recipe.Next cool for 5 minutes then run cold water over the lid until the steam stops.Lift the guage off with a 2 prong fork. If the lid doesn't want to open at that time,continue running the cold water over it while gently lifting the gauge off with the fork. Your food may be cooled more than you want,but you can heat it without any pressure gauge. I would be happy to send you some recipes via email if you like. My email address is bjptl AT bellsouth.net. Judy in Alabama
I've cooked with a pressure cooker many times and I do remember the recipe book saying that you can use running water to remove the pressure, but it also stated that there are some foods that need to cool on their own as this extra time is part of the cooking process. I always used running water over the lid, making sure to not hit the gauge - the pressure will cool with a hiss and then the "gauge" can be removed. Now there are different kinds of "gauges." A pressure cooker for canning is usually larger and its gauge is marked - maybe with temps.
Now, after googling Innova pressure cookers, I notice that the "regulator" as they call it is adjustable for 5-10-15 lbs of pressure. You might want to google your brand and order exactly what came with your cooker - even though your model might be discontinued, there are probably parts still available.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
