Maintaining a Paper Shredder?

I was shredding paper, and my home paper shredder just quit on me. No noise, no sparks, no anything. It's held together by phillips screws, and being a former electronics tech, I decided to take it apart. (Who can afford a new shredder, employed or not.)

Make sure it is unplugged when you do this! I don't know how many times I took the phillips screws out from the cover. Immediately I was aghast at all the paper dust and paper shreds that were all over the inside of the paper shredder. I immediately cleaned all of that out, wishing I had a brush, but using tweezers, a modified paper clip (just making one side of the paper clip long), and a couple of q-tips, then carefully oiling the fan drive shaft.

I put the Paper Shredder back together, screwed in all the screws, plugged it in, and reverse worked, but the paper part wouldn't work. After more examination, I realized that there is a secondary switch and lever that can't be seen when the whole unit is put together. This is what allows the paper to shred. I lined up the lever with the secondary switch, and using a small screwdriver, (instead of using paper at this point), listened to it, then put the unit back together. It worked. I truly hope this helps other people keep their paper shredders working.

If you use q-tips, or such, don't ever leave the hairs, or whatever they are called on the electronics - ever! Those hairs will just mess everything up.

By Carol Rodriguez from SouthBend, IN