social

Ribbon Headbands

Approximate Time 30 minutes

Supplies:

  • 1/2 yard of 3/4 - 1/2 inch wide elastic in a color of your choice
  • different styles of a yard or more length ribbbon in 1/2 inch and 1 inch widths
  • scissors
  • buttons (optional)
  • thread
  • sewing needle
  • measuring tape

Instructions:

I have tried three different styles of ribbon head bands. You will have to decide which one works best for you.

Advertisement

Simple Strap

Green ribbon headband with elastic section.

 
  1. Measure your ribbon a little over 1/2 a yard around your own head or head of the person you want it to fit so there is about 1 - 2 inch space between the two ends. Alternately you can actually measure the head with the measuring tape and use this as a guide to cut your ribbons.
  2. Cut ribbon to that size.
  3. Cut a wide piece of elastic just slightly longer than the 1-2 inch gap you measured between the ends of the ribbon on your head.
  4. Hem the two ends tightly over so it doesn't fray, attaching your piece of elastic to each hemmed side. You may either attach the elastic at the time of hemming or after.

Single Strap with Long Ends

Long ends.

 

    Advertisement

  1. Measure a 1 yard strip of ribbon similar to the single strap method, but do not cut it.
  2. Take a similar sized piece of wide elastic and attach it at the that point on the ribbon to both ends of ribbon leaving two long pieces to hang down. You may then hem the loose ends up slightly or leave them.

Loop and button

Button and loop closure.

 

  1. Measure slightly over a 1/2 yard of desired ribbon around head leaving 1-2 inch gap between ends at back of head (cut it to this size).
  2. Hem each end over slightly.
  3. Sew an attractive button to one end. Sew a 2 inch loop of thin elastic to the other side, creating an elastic button hole. Wrap around head and secure loop to button.
Advertisement

Voila!

By Mara from Seattle, WA

Add your voice! Click below to comment. ThriftyFun is powered by your wisdom!

 
May 24, 20080 found this helpful
Top Comment

To keep it from slipping off your head, just sew/glue a small peice of cut rubber (band) to the underside of the ribbon. the bands that come with brocolli would work pretty good I would think.

 

Bronze Post Medal for All Time! 213 Posts
May 23, 20080 found this helpful

I made one of these several months back, but it kept slipping off of my head! ...I tried gluing on some Velcro on to the underside, but it hurt my scalp... Anybody out there got any easy & quick ideas about how to stop these beautiful ribbon headbands from slipping?

Advertisement

* Hmmm... I just thought of something... Maybe if I sprayed a bit of hairspray on the underside??? I wonder if that would help? ...One thing's for sure, the hair spray will surely make the ribbon sticky & dirt will eventually gather, I hope I can easily wash them! ...I guess it depends on what type of ribbon I use.

 

Silver Feedback Medal for All Time! 378 Feedbacks
May 23, 20080 found this helpful

Very clear photos, thanks! Maybe a wider ribbon would have more friction? or a satin outside and a terrycloth inside?

 

Add your voice! Click below to comment. ThriftyFun is powered by your wisdom!

 
In This Page
Categories
Crafts Bath & BeautyMay 23, 2008
Pages
More
💘
Valentine's Ideas!
🍀
St. Patrick's Ideas!
🎂
Birthday Ideas!
Facebook
Pinterest
YouTube
Instagram
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2024-02-05 13:36:22 in 7 secs. ⛅️️
© 1997-2024 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/tf83196452.tip.html