I have a 18hp MTD mower that won't turn over. I've replace the starter switch, starter solenoid, and safety switch, as well as replaced the 7.5 amp fuse. Any ideas?
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
I usually try spraying a little carb cleaner in as I turn the key. You can try the fuel filter and make sure your gas is still good after sitting all winter.
I was having the same problem. It turns out that a piece of cord was wrapped so tightly around the blade shaft that it was frozen there. Cutting wet grass has jammed my blade also.
Have you checked your spark plug for carbon, that would be my next check, then the fuel filter to see if it's clogged.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
