I can't get the stopper lever on my bathtub to go down to let the water out. It is stuck upwards and needs to go down. Does anyone know how to fix?
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
www.hammerzone.com/
Unscrew the front plate and make sure something inside is not jammed or broken. The fix is generally easy and if it can be dismantled, you can take it out and go to your local Home Depot. Those folks rock!
The website is good too!
The stopper is controlled by a lever UNDER the sink which is attached to the plunger. It's easy to fix, crawl under the sink and at the BACK of the main pipe is the control and it is usually silver metal and comes out of your main pipe. Yours either came unattached or it is hung up on something. Just jiggle it around. If you have another sink in the house that is similar you can look under that one and see how it works and see how it is attached and then you can fix the problem.
Whoops! I just noticed that your BATHTUB stopper has the problem, not the sink stopper. So, just ignore my previous "fix-it" post.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
