Reassembling the Tension Adjustment Mechanism on Kenmore Sewing Machine
I have Kenmore sewing machine model 1217. As I was cleaning the entire machine, taking pieces apart and putting back together, I ran into some trouble on the tension parts. I unscrewed the front screw too much and most of the pieces popped off.
Bobbin Isn't Picking Up Top Thread
My sewing machine needle keeps hitting something and my bobbin will not loop at the bottom.
Rewiring an Older Sewing Machine
My sewing machine is so old that the wires are showing the copper threads (can see them from the motor). Is it possible that it can be rewired or else, what? I love that Goodhousekeeper machine and feel bad about throwing it away. Its serial number is JA23 LG33.
Repairing a Good Housekeeper Sewing Machine
I have an old Good Housekeeper sewing machine that needs some repair. Where are some locations in my area? It was given to me. Thank you.
Adjusting the Tension on a Serger Sewing Machine
I have a Babyloc Imagine serger that needs a bit of adjustment. The overlock is folding over the fabric and the tension is too tight. Does anyone know how to adjust the tension on this serger? I have tried everything and hate bringing it to a center; they charge so much.
Thumb Screw on Kenmore Sewing Machine Won't Loosen
I need help with a Sears Kenmore 156-18031. I am unable to remove the mechanism that attaches the feet. As I try to remove the thumb screw, it becomes tighter. If I turn the other way, it it becomes tighter, too.
Reverse Button on Sewing Machine Stuck
The button that you press in to make the machine sew backwards is stuck. How do I fix this problem without taking the machine apart?
Adjusting Sewing Machine Tension
I have a problem with my sewing machines. I have 2 different brands, different ages, but the same problem with both so I'm sure it's me and not the machine.
Embroidery Stitch Doesn't Work on Singer Model #6268
I have a Singer Sewing #6268 that sews beautiful until I put the embroidery attachment on it, then it won't pick up the top stitches to do the embroidery pattern. Can anybody help me with this problem?
Sewing Machine Bobbin Winder Spindle Not Working
I need someone to tell me how to fix the top part that holds the empty bobbin in place while its filling with thread. The thing that holds bobbin in place while its filing with thread does not work anymore.
Repairing Sewing Machine Reverse Switch
My sewing machine's reverse switch is creating problems in sewing. It moves all the time in and outside. Would any one help me in correcting this?
I have a Baby Lock that is sluggish. It barely moves when I try to turn the wheel. How can I fix it?
Installing Needle Threader on Home Sewing Machine SX2122
I need instructions on how to install a needle threader on the New Home Sewing Machine model SX2122. It is the type you pull down. I just got a new one but no instructions came with it. Please help.
Adjusting Sewing Machine Feed Dogs
The feed dogs on my sewing machine won't stay up and I wonder how to adjust them?
Sewing Machine Needles Gumming Up
How can I keep my sewing machine needle from gumming up when using sew-in computer printer fabric?
What Is A Balance Bar On A Serger?
I would like to know if anyone can tell me what a balance bar is on a serger sewing machine? The thing is skipping stitches bad and no matter what I sew it still skips. I have cleaned it, changed needles, checked tensions, rethreaded,etc but it is still skipping.
I was trying to fix a sluggish and squeaky sewing machine. I somehow managed to make it worse. The problem is the big wheel on the right hand side doesn't catch and therefore will spin and not move the "works" up and down like it is supposed to. The belt is on and I have cleaned and oiled every moving part I can find. Any ideas? It is a Simplicity Classic.
Jammed Drive Wheel on a Kenmore Ultra-Stitch 12
My drive wheel on my Kenmore ultra 12 stitch has jammed. I can not turn the wheel anymore than a quarter or a turn. What would cause this to happen? How do I fix it so the sewing machine will sew again?
Sewing Machine Keeps Breaking Needles
My sewing machine needs adjustment but I don't know how and I can't afford to take it to a repair shop. The needle keeps hitting and breaking or bending really bad on the feed dog. Does anyone know how and what to adjust so the needle is in time with the feed plate.
Salvaging Flooded Sewing Machines
Most damage to flooded sewing machines is caused by rust. Even if the machine was not submerged, check for rust caused by general dampness. Rust develops quickly on highly polished, machined or plated surfaces.
Showing Articles 1 - 20
Previous 20 Home Oldest Next 20
