Share on ThriftyFunThis page contains the following solutions. Have something to add? Please share your solution!
Here is a quick fused plastic bag craft idea for Valentine's Day. This project involves no sewing or crocheting. It's makes a perfect kid's craft project that focuses on using recycled materials. This project was inspired by a recent comment I received from someone who wanted a recycled bag for Valentine's day but didn't know how to crochet.
So here's what I came up with. By using some pieces of red and white recycled plastic bags, some scrap yarn, a bit of ribbon and a small remnant of red felt, you or your children can put together this cute Valentine's heart bag.
Below you will find the picture tutorial that I made while I was creating this little Valentine's heart bag. Here is the step-by-step picture tutorial on how to DIY.
I used a retail plastic bag that had some red on it as I wanted my Valentine heart to have a red background. I cut out the store name and folded over the plastic so the red was all together in a block.
I then covered the red with a piece of plain white plastic bag. You must cover over the ink when fusing otherwise when the ink gets hot, it runs and gets real messy. I created two separate sheets for this project. Each sheet was made with 3 sheets of plastic. White on the bottom, red in the middle, and another white sheet covering over the red ink on the top.
Next cover your plastic with a sheet of wax paper and apply heat using a medium setting on your iron. Don't get it too hot and keep your iron moving as you apply the heat. Let cool a moment and check your fusing. Repeat the process on the other side of the fused piece as you need to apply heat to both sides of your project. Make sure you have the wax paper completely over the plastic bag so you don't melt the plastic or create holes with the iron.
Next I cut a heart template using a piece of newspaper and then cut out my two hearts from the fused plastic pieces. Use whatever size of a heart that you want to make your project.
Next I used some red yarn to lace around the outer edge. Put the two cut hearts together and I started by lacing through both layers on the upper right side as shown. I used a big darning needle which works well to poke the big holes into the fused plastic. I continued around by lacing through both layers until I got up to the left hand side to match the right side where I started. At this point I only laced through the front layer of the heart. This creates your opening for your cards.
Lastly, I cut a heart from a scrap of red felt I had and glued it onto the front of the fused plastic. I added a piece of red ribbon so that my Valentine's heart could be hung up. Fill your heart with Valentine's or candy and you are all done!
By Cindy from MyReycledBags.com