It's a Husqvarna riding mower. I ran over the metal gutter on the ground from the house. The engine will attempt to start and when I turn the blade on it won't even turn over to start at all. Like it's nothing. The blades looks fine though. And also the belt does look a little loose. I am not sure if it's suppose to be that way.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
The tension of your belt should not be loose, make sure blade is not bent and clear of debris!
If the mower shut off after hitting something there is normally a safety switch under the seat that needs to be pushed to start it again. Plus before you can start the mower you need to clean under the mower, remove anything that is stuck in the blade and make sure the belts are all tight and in place.
yes the blade is fine and clear I hit a small piece of tin metal. I didn't know about a safety switch I look for it when I get home ty
You bent or broke a part. It needs servicing
If you are handy and willing, check YouTube for Husqvarna troubleshooting videos. There were a bunch out there the last time I looked and I find videos to be the most helpful trying to figure things out.
This way if it does need service, you can at least have an idea of what to ask and you can google to see what expected costs should be.
Post back with an update!!
will do thanks but first I'm going to look for that safety switch everyone talking about when I get home.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
